| |
The K-VP-100 is a high performance
VGA/XGA/UXGA to RGBHV converter designed to allow a single VGA/XGA/UXGA
source to drive a local monitor and a remote large display device simultaneously.
Many projectors and large monitors use BNC connectors rather than multi-pin
D connectors. The VP-100 solves this physical incompatibility, and provides
the local monitor loop-through, as well as necessary buffering, amplification,
and sync processing for remote acceptors applications. Note that the VP-100
does not perform any scan rate conversion.
The VP-100 will accept all typical graphics modes such as VGA, SVGA, XGA,
SXGA, and UXGA and will output RGsB, RGBS, or RGBHV. Video bandwidth of
350 MHz ensures transparent operation at multiple resolutions including
UXGA. The machine allows looping with a termination switch, cable EQ.
Control, Hs and Vs shift control and ID bit control. The machine is fed
from an external 12 VDC source, and therefore is perfectly suitable for
field operation as well. The VP-100 is part of the Kramer TOOLS family
of compact, high quality, and cost effective solutions for a variety of
applications
|
|
K-VP-100
VGA/XGA to RGBHV Converter / Interface
