AV Tool - Kramer Tools


	K-709/10 Twisted Pair SV Tx/Rx
	K-709 and K-710 Twisted Pair Transmission System consists of the K-709 high performance S-Video to Twisted Pair Transmitter and the K-710 companion Receiving Unit, which converts the Twisted Pair format back to S-Video. Transmission via twisted pair cable carries video signals farther than conventional coax cable, and is lighter and less expensive. Cable lengths of several hundred meters are possible. A simple system consists of a K-709 located at the S-Video source, and a K-710 located at the remote display device. For systems with multiple monitors, the K-710 receiver has a loop out and termination switch allowing several K-710 units to be placed on the same Twisted Pair cable driven by a single K-709 . Recessed gain and equalization controls are provided to optimize signal levels. A 12V power supply is included. The K-709 and K-710 are part of the Kramer Tools family of compact, high quality, and cost effective solutions for a variety of applications.

K-709/10 Features and Specs

K-709 Transmitter Input: 1 S-Video, 1Vpp/75Ω(Y), 0.3Vpp/75Ω(C) on a 4-Pin Mini-DIN connector.
K-709 Transmitter Output: 1 Balanced, 150Ω on a 4-Pin Terminal Block.
K-710 Receiver Input: Looping Balanced 150Ω on a 4-Pin Terminal Block.
K-710 Receiver Output: 1S-Video, 1Vpp/75Ω(Y), 0.3Vpp/75Ω(C) on a 4-Pin Mini-DIN connector.
VIDEO BANDWIDTH: 8.4 MHz -3dB, (Y).
GAIN RANGE: -2.4 to +6.5 dB (Y), -2.7 to 15.6 dB, (EQ.), -5.8 to +7.8 dB (C).
NON-LINEARITY: 0.07%.
DIFF. GAIN (PAIR): 0.04%.
VIDEO S/N RATIO(PAIR): Better than 60dB.
POWER SOURCE: 12 VDC 40 mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98", W, D, H.)
WEIGHT: 0.26 kg. (0.58 lbs.) Approx.
ACCESSORIES: Power supply.

Click the image for a larger view ...

K-709 Photo

K-710 Photo

Kramer Transmission Main
K-703xl    K-705xl    K-706xl
K-707/8    K-709/10    K-711/12XL
KPT-110    KTP-41    KTP-42
KTP-104    KTP-105    KTP-120
KTP-300FW    KVA-10    K-611T/R