| |
K-707 and K-708 Twisted Pair Transmission
System consists of the K-707 high performance
Composite Video/Mono Audio to Twisted Pair Transmitter and the K-708
companion Receiving Unit, which converts the Twisted Pair format back
to Composite Video and Mono Audio. Transmission via twisted pair cable
carries video signals farther than conventional coax cable, and is lighter
and significantly less expensive. A simple system consists of a K-707
located at the source, and a K-708 located at the remote
display device. For systems with multiple monitors, the K-708
Receiver has a Loop/Termination switch allowing several K-708
Receivers to be placed on the same Twisted Pair cable driven by a single
K-707 . Even at a cable length of 400 meters, the frequency
response is well over 6 MHz, and at shorter distances they provide close
to broadcast level performance. Recessed gain and equalization controls
are provided to optimize signal levels. A 12V power supply is provided
with each unit. The K-707 and K-708
are part of the Kramer Tools family of compact, high quality, and cost
effective solutions for a variety of applications
|
|