Chat with us live
 
 

CB-11 RF Distribution Amp

 
 

CB-11 RF Distribution Amplifier provides four identical RF outputs from a single RF input.  The input signal is amplified and distributed via its internal circuitry to insure that all four RF outputs are of identical quality to the input signal.  An RF source, such as a Cable TV signal or Off-Air Antenna can now be fed to four different TV Sets without signal degradation.  The CB-11 has 20dB maximum gain and the amount of amplification can be adjusted via control knob on the outside of the unit.  Since it is wide band amplifier, it can be used for all VHF and UHF frequencies, including CATV Systems. The unit's 20dB gain is sufficient to overcome the loss introduced by running coaxial cables to multiple rooms within a house, insuring that all TV Sets receive a proper input signal.

 
     
 
CB-11 Features and Specs
  • 1 RF Input via F-type connector  
  • 4 RF Outputs via F-type connectors  
  • Maximum Amplification: 20dB from 40-759MHz and 10dB from 750-850MHz  
  • Gain Control: 0-20dB  
  • Noise Figure: <5dB  
  • RFI Shielded Metal Housing  
  • Size: 1.3" High x 3.5" Wide x 5.7" Deep (33mm x 90mm x 145mm) 
  • Weight: 1 lbs 10 oz (0.75kg)  
  • External 115VAC to 12VDC @ 200mA Power Supply Included  
  • One-Year Limited Warranty  





Click the image for a larger view ...

CB-11 Front CB-11 Typical Use