| |
AVT-5542 Automatic Router allows
you connect four S-Video and Stereo Audio sources and select which of
them is routed to the output. Two outputs are provided to feed two
devices with the same signal, such as a TV Set and a VCR. Multiple
input devices, such as S-VHS or Hi-8 VCR's, DVD Players, Video Game Consoles,
Satellite Receivers, etc., can be connected to two destination devices
without moving cables around. The AVT-5542 functions in two modes,
Automatic or Manual. In the Manual mode, the front panel push button
selects which input is chosen. In the Automatic mode, the input
signal that is present is automatically selected, so you choose the source
by turning its power On and leaving the power switched Off to the other
sources. This eliminates the need for an additional Remote Control
to operate the switcher. If more than one source signal is present,
a front panel LED flashes to alert you to switch power off to all but
one device. The award winning circuit employed in the AVT-5542 insures
that no signal degradation takes place, so the quality you put in is the
same as the quality you get out.
|
|
